1. Imaging effect: According to the imaging effect of the mirror, it is assumed that the thickness of the mirror is 5mm within a distance of two meters cannot be deformed skewed. When using the mirror, it is necessary to pay attention to the fact that the straight object in the mirror does have any tilt deformation, which means that the imaging effect of the mirror is very good.

2, mirror thickness: Generally speaking, the thicker the mirror, the better the quality.

However, some people will choose thinner bathroom mirrors because they are relatively cheap. However, too thin bathroom mirrors can break easily. There are many safety risks.

Mirror appearance: When looking at the appearance of the mirror, the quality of the mirror is usually poor if there are bubbles, debris, broken glass, discoloration of the lens surface, increased brightness blackening of the mirror edges.

The processing is also very rough, so it is recommended to buy

4. Production process: To protect the silver ions reacting with moisture in the air, the lens spots are avoided.

The bathroom mirror will be coated with a copper film a primer finish.

The protective layer is used to extend the life of the mirror.

5. Materials: There are usually two kinds of materials for bathroom mirrors on the market: aluminum silver.

Silver mirror is formed by electroplating silver, aluminum mirror is the answer is yes.

Although the two mirrors are very similar in appearance, they differ in effect.

The effect of silver mirror is better than that of aluminum mirror.

Therefore, the cost is higher.

Above is small make up for you to organize the information, I hope to help you.